基于新型ICP脉动压力传感器的信号调理电路设计与实现

更新时间：2020-09-01 05:01:10 大小：809K 上传用户：守着阳光1985 查看TA发布的资源 标签：icp 压力传感器信号调理 下载积分：5分评价赚积分（如何评价?）收藏评论(0) 举报

资料介绍

在飞行器地面试验中，新型ICP脉动压力传感器常用来测量飞行器与发射筒之间的关键位置表面由于空气脉动产生的脉动压力参数；ICP脉动压力传感器工作时需要恒流源供电，同时其输出信号不能满足大多数模数转换芯片对于输入电压的要求，针对以上问题，提出了一种基于新型ICP脉动压力传感器的信号调理电路，并详细介绍了电源电路、脉动压力信号调理电路等模块的设计原理和方法；测试结果表明该设计能够满足新型ICP脉动压力传感器3．4mA恒流源供电需求，并且能准确地将其输出电压信号调理为0．366～2．13V，符合AD7667转换范围要求，同时能有效地滤除信号中混入的9．6kHz以上的高频噪声以及椭圆型高阶低通滤波器自身引入的开关噪声；该信号调理电路可靠性高，已经成功应用于飞行器地面发射试验中。

In aircraft ground launch test, the new ICP pulse pressure sensor is commonly used to measure pulse pressure parameters of key location surface between aircraft and the launch canister which is produced by air pulse. In view of the problems that constant--current power supply should be in accordance with the need of the sensor during working, and the output signal cannot be directly converted through most AD converters, which is easily fixed with high frequency noise, this paper mainly came up with a kind of signal adjustment circuit based on the new ICP pulse pressure sensor, meanwhile theory and method...