推荐星级:
- 1
- 2
- 3
- 4
- 5
ST7701S NVM Program Flow for internal VPP
资料介绍
ST7701S NVM Program Flow for internal VPP
Step 1. Attach LCD module on Test machine.
Step 2. Initialize the non-programmed module by software.
Step 3. Use command B9h in Bank3 to fine tune VCOM offset.
Step 4. Check the image quality of display module. If flicker can be still
observed on the panel, repeat the command B9h until the flicker phenomenon
disappeared.
Step 5. Hardware Reset and sleep out. The panel must be in sleep out mode
and cannot be in display on mode as internal VPP NVM programming
procedure.
Step 6. NVM programming code
部分文件列表
文件名 | 大小 |
ST7701s_NVM_Program_Flow_including_gamma_for_internal_VPP_V1.3.pdf | 41K |
全部评论(0)