推荐星级:
- 1
- 2
- 3
- 4
- 5
openwrt下安装mwan3做负载均衡
资料介绍
openwrt 下安装mwan3 做负载均衡
1. 安装mwan3
1. opkg updata #更新安装包
2. opkg list | grep mwan #查看mwan安装包列表
3. opkg install luci - app- mwan3
4. opkg install mwan3
5. #分别安装这2 个包
2. web 界面设置
找到菜单栏Network-Load Balancing ,可以看到负载均衡的界面,由于路由器本身已有
Wan1 口,所以接下来分别添加Wan2 和Wan3 口.
Network-Interface 下,点Add new interface,Name of the new interface :填
wan2
Protocol of the new interface :选PPPoE 或DHCP ,看运营商给你的光纤类型
Cover the following interface :选新增接口对应的物理网卡地址,我这里是eth2
填完点Submit ,会转到PPPoE 界面,填入接入商提供的用户名密码,点save ,依次添加
Wan3 接口
部分文件列表
文件名 | 大小 |
openwrt下安装mwan3做负载均衡.pdf | 637K |
部分页面预览
(完整内容请下载后查看)openwrt 下安装 mwan3 做负载均衡
1. 安装 mwan3
1.
2.
3.
4.
5.
opkg updata
opkg list
#更新安装包
| grep mwan #查看 mwan安装包列表
opkg install luci
- app- mwan3
opkg install mwan3
#分别安装这 2 个包
2. web 界面设置
找到菜单栏 Network-Load Balancing
,可以看到负载均衡的界面,由于路由器本身已有
Wan1 口,所以接下来分别添加
Wan2 和 Wan3 口.
Network-Interface
下,点 Add new interface,Name of the new interface
:填
wan2
Protocol of the new interface
Cover the following interface
:选 PPPoE 或 DHCP ,看运营商给你的光纤类型
:选新增接口对应的物理网卡地址,我这里是
eth2
填完点 Submit ,会转到 PPPoE 界面,填入接入商提供的用户名密码,点
Wan3 接口
save ,依次添加
全部评论(0)