KSZ9896C
6-Port Gigabit Ethernet Switch
with GMII/RGMII/MII/RMII Interface
• One Ext. MAC Port with GMII/RGMII/MII/RMII
Highlights
-
RGMII v2.0, RMII v1.2 with 50MHz reference clock
input/output option, MII in PHY/MAC mode
• One port with 10/100/1000 Ethernet MAC
and configurable GMII/RGMII/MII/RMII interface
• IEEE 802.1X access control support
• Five ports with integrated 10/100/1000BASE-T PHY
transceivers
• Non-blocking wire-speed Ethernet switching fabric
• Full-featured forwarding and filtering control, includ-
ing Access Control List (ACL) filtering
• Full VLAN and QoS support
• EtherGreen™ power management features,
including low power standby
• Flexible management interface options: SPI, I C,
MIIM, and in-band management via any port
• Commercial/Industrial temperature range support
• 128-pin TQFP-EP (14 x 14mm) RoHS compliant pkg
• Five Integrated PHY Ports
-
-
-
-
1000BASE-T/100BASE-TX/10BASE-Te IEEE 802.3
Fast Link-up option significantly reduces link-up time
Auto-negotiation and Auto-MDI/MDI-X support
On-chip termination resistors and internal biasing for
differential pairs to reduce power
-
LinkMD® cable diagnostic capabilities for determining
cable opens, shorts, and length
• Advanced Switch Capabilities
-
IEEE 802.1Q VLAN support for 128 active VLAN
groups and the full range of 4096 VLAN IDs
IEEE 802.1p/Q tag insertion/removal on per port basis
VLAN ID on per port or VLAN basis
2
-
-
-
IEEE 802.3x full-duplex flow control and half-duplex
back pressure collision control
-
IEEE 802.1X access control
Target Applications
(Port-based and MAC address based)
-
-
-
-
-
-
-
IGMP v1/v2/v3 snooping for multicast packet filtering
IPv6 multicast listener discovery (MLD) snooping
IPv4/IPv6 QoS support, QoS/CoS packet prioritization
802.1p QoS packet classification with 4 priority queues
Programmable rate limiting at ingress/egress ports
Broadcast storm protection
• Stand-alone 10/100/1000Mbps Ethernet switches
• VoIP infrastructure switches
• Broadband gateways/firewalls
• Wi-Fi access points
• Integrated DSL/cable modems
• Security/surveillance systems
• Industrial control/automation switches
• Networked measurement and control systems
Four priority queues with dynamic packet mapping for
IEEE 802.1p, IPv4 DIFFSERV, IPv6 Traffic Class
MAC filtering function to filter or forward unknown uni-
cast, multicast and VLAN packets
-
-
Self-address filtering for implementing ring topologies
Features
• Comprehensive Configuration Registers Access
2
• Switch Management Capabilities
-
High-speed 4-wire SPI (up to 50MHz), I C interfaces
provide access to all internal registers
-
10/100/1000Mbps Ethernet switch basic functions:
frame buffer management, address look-up table,
queue management, MIB counters
-
MII Management (MIIM, MDC/MDIO 2-wire) Interface
provides access to all PHY registers
-
Non-blocking store-and-forward switch fabric assures
fast packet delivery by utilizing 4096 entry forwarding
table with 256kByte frame buffer
-
-
In-band management via any of the data ports
I/O pin strapping facility to set certain register bits from
I/O pins at reset time
-
-
Jumbo packet support up to 9000 bytes
-
On-the-fly configurable control registers
Port mirroring/monitoring/sniffing:
ingress and/or egress traffic to any port
• Power Management
-
-
-
-
-
Energy detect power-down mode on cable disconnect
-
-
MIB counters for fully-compliant statistics gathering
34 counters per port
Dynamic clock tree control
Unused ports can be individually powered down
Full-chip software power-down
Tail tagging mode (one byte added before FCS) sup-
port at host port to inform the processor which ingress
port receives the packet and its priority
Wake-on-LAN (WoL) standby power mode with PME
interrupt output for system wake upon triggered events
-
-
Loopback modes for remote failure diagnostics
Rapid spanning tree protocol (RSTP) support for topol-
ogy management and ring/linear recovery
Multiple spanning tree protocol (MSTP) support
-
2017-2019 Microchip Technology Inc.
DS00002390C-page 1
全部评论(0)