嵌入式技术在电子通信节能中的应用研究

传统嵌入式电子通信节能控制系统,传输端未利用芯片监控设备数据,节能效果不明显。因此,进行嵌入式技术在电子通信节能中的应用研究,设计嵌入式电子通信设备节能控制系统。该系统由应用端、终端、控制端和传输端构成,实现嵌入式数据的统计与通信功能,达到嵌入式电子通信设备的高效节能的目的。传输端为系统的核心,通过RS488总线传输串口将数据发送到控制端,采用SN65LB芯片控制嵌入式通信设备数据的监控和解析。控制端通过节能控制执行电路实现电子通信设备的节能控制。终端中的无线通信模块利用电路进行信息通信,系统中的节能控制指令通过控制软件实现。实验结果表明,采用所设计系统节能控制后的设备能耗为4.8335kW·h,较节能控制前大幅降低,节能效果显著。

In the traditional embedded electronic communication energy-saving control system,the chip is not used at the transmission end to monitor the equipment data,resulting in unobvious energy-saving effect.Therefore,an application research of the embedded technology is carried out for electronic communication energy-saving,and an energy-saving control system is designed for the embedded electronic communication equipment.The system is composed of the application end,terminal,control end and transmission end,and realizes the statistics and communication functions of the embedded data,so as to achieve the high-efficient energy-saving goal of the embedded electronic communication equipment.The transmission end is the core of the system,which sends data to the control end through the transmission port of RS 488 bus.The SN65LB chip is used to control the monitoring and parsing of the data of the embedded communication equipment.The control end realizes energy-saving control of the electronic communication equipment by using the energy-saving control execution circuit.The wireless communication module in the terminal conducts information communication by using the circuit.The energy-saving control instructions in the system are realized by means of the control software.The experimental results show that the equipment energy consumption of the designed system with energy-saving control is 4.833 5 kW?h,which is significantly lower than that without energy-saving control,and the system has a significant energy-saving effect.