- 1
- 2
- 3
- 4
- 5
一种滞环恒流LED驱动电路的电流采样电路
资料介绍
针对滞环恒流大功率LED驱动芯片，提出一款高性能电流采样电路。该电路采用高压工艺，可承受最高达40V的输入电压。通过分析滞环控制的特点，采用串联电阻采样技术，结合匹配电流源结构，在保证响应速度和采样精度的同时，降低了电路的复杂度。电路中加入输入电压补偿电路，进一步提高了恒流控制的精度。在Cadence下的仿真结果表明，电路可在800kHz的频率下正常工作，采样精度达99．78％；当电压从15V变化至35V时平均负载电流误差为0．81％；输出电压范围为0—5V。
A high-performance current sensing circuit for the high-power LED driver using current control is proposed. It is a high-side current sensing circuit using high voltage process and can withstand up to a 40 V input voltage. By analyzing the characteristics of hysteresis control and using the series-sense resistor sampling technology and matched current source structure, the circuit reduces the complexity while ensuring the response speed and sam- piing precision. An input voltage compensation circuit is also added to improve the precision of current control. The simulation results in Cadence show that the circuit can work correctly when the operating frequency is 800 kHz. The current sensing accuracy can be u...
部分文件列表
| 文件名 | 大小 |
| 一种滞环恒流LED驱动电路的电流采样电路.pdf | 271K |
全部评论(0)