- 1
- 2
- 3
- 4
- 5
0.96带字库OLED屏 规格书 技术手册
资料介绍
0.96带字库OLED屏 规格书 技术手册
Designing Precautions 1) The absolute maximum ratings are the ratings which cannot be exceeded for OEL display module, and if these values are exceeded, panel damage may be happen. 2) To prevent occurrence of malfunctioning by noise, pay attention to satisfy the VIL and VIH specifications and, at the same time, to make the signal line cable as short as possible. 3) We recommend you to install excess current preventive unit (fuses, etc.) to the power circuit (VDD). (Recommend value: 0.5A) 4) Pay sufficient attention to avoid occurrence of mutual noise interference with the neighboring devices. 5) As for EMI, take necessary measures on the equipment side basically. 6) When fastening the OEL display module, fasten the external plastic housing section. 7) If power supply to the OEL display module is forcibly shut down by such errors as taking out the main battery while the OEL display panel is in operation, we cannot guarantee the quality of this OEL display module. 8) The electric potential to be connected to the rear face of the IC chip should be as follows: SSD1306 * Connection (contact) to any other potential than the above may lead to rupture of the IC
部分文件列表
| 文件名 | 大小 |
| ZJY096S08Z0WG01.pdf | 2M |
全部评论(0)