推荐星级:
  • 1
  • 2
  • 3
  • 4
  • 5

激光化学气相沉积法在TFT-LCD电路缺陷维修中的应用

更新时间:2020-10-27 18:09:46 大小:450K 上传用户:gsy幸运查看TA发布的资源 标签:tft电路缺陷维修lcd 下载积分:2分 评价赚积分 (如何评价?) 打赏 收藏 评论(0) 举报

资料介绍

为了维修TFT-LCD电路缺陷,利用激光化学气相沉积法(LCVD)沉积钨薄膜,讨论成膜参数对基底损伤、钨薄膜电阻率的影响。在空气氛围下,波长为351nm的脉冲激光诱导W(CO)6裂解成膜,通过聚焦离子束-扫描电子显微镜(FIB-SEM)观察薄膜横截面研究成膜参数对基底损伤的影响,再用高精度的电参数测试仪(EPM)测试不同参数下钨薄膜电阻。控制变量法表明,激光功率或激光束光斑尺寸越大,薄膜基底损伤越大,但电阻率越小,且不沉积薄膜时高功率激光辐射也不会造成基底损伤;激光辐射速度越大,基底损伤越小,但电阻率越大。通过平衡工艺参数,得到了电阻率为0.96Ω/μm、对基底无损伤的钨薄膜,成分分析表明此时W(CO)6已经完全裂解。

The deposition of tungsten film through laser chemical vapor deposition(LCVD)was investigated for the repair of circuit defects of TFT-LCD panels,simultaneously the film-forming process parameters influencing the damage of thin film transistor substrate,electrical resistance of tungsten film were stly,the pulsed laser irradiation at 351 nm was used to deposit tungsten from W(CO)6 in air atmosphere,and the damage of thin film transistor substrate at diverse film-forming process parameters were observed through focused ion beam-scanning electron microscope(FIBSEM).Then,the electrical resistances of tungsten films at various film-forming process parameters were tested by high-accuracy Electrical parameter tester(EPM).The control variable method experiments indicate that the larger laser power or bigger size of slit placed in the beam path lead to more serious substrate damage but lower electrical resistivity,and high-power laser radiation without tungsten film deposition can’t cause substrate damage;greater laser scan speed result in less substrate damage but higher resistivity by maintaining other effect factors lower resistivity(0.96Ω/μm)and good surface morphology tungsten film is obtained without damage of the thin film transistor substrate at balanced condition,and component analysis shows that W(CO)6 are complete decomposed.

部分文件列表

文件名 大小
激光化学气相沉积法在TFT-LCD电路缺陷维修中的应用.pdf 450K

【关注B站账户领20积分】

全部评论(0)

暂无评论

上传资源 上传优质资源有赏金

  • 打赏
  • 30日榜单

推荐下载