- 1
- 2
- 3
- 4
- 5
基于STM32及PID-PWM的智能水温监控系统设计
资料介绍
以STM32F407ZGT6单片机作为控制核心,设计以集成DS18B20芯片的防水型水温探测温线作为温度反馈传感器,采用积分分离的比例(Proportional)、积分(Integral)、微分(Derivative)算法,即PID算法控制脉冲宽度调制(PWM)占空比进行智能水温闭环控制,同时用TFT液晶屏监控控制过程。实验结果表明该系统能快速、准确地进行水温控制,系统稳定性良好。系统控制精度达到0.1℃,温度波动小于0.5℃。
STM32F407ZGT6 micro controller unit was used in this design as the control core, and a waterproof temperature sensitive device integrated with DS18B20 was used as the temperature feedback sensor. The separation integral PID control algorithm was used to adjust duty cycle of PWM for intelligent closed-loop control of water temperature, and the TFT LCD screen was used to monitor process. The experimental results show that the system can control the water temperature quickly and accurately, and it has good system stability. The accuracy of the system is up to 0.1 ℃,and the temperature shift is less than 0.5 ℃.
部分文件列表
文件名 | 大小 |
基于STM32及PID-PWM的智能水温监控系统设计.pdf | 6M |
全部评论(0)