MSPM0L110x MSPM0L13xx Microcontrollers Errata

This document describes the known exceptions to the functional specifications (advisories). Table of Contents 1 Functional Advisories............................................................................................................................................................ 1 2 Preprogrammed Software Advisories.................................................................................................................................. 1 3 Debug Only Advisories.......................................................................................................................................................... 1 4 Fixed by Compiler Advisories............................................................................................................................................... 1 5 Device Nomenclature............................................................................................................................................................. 2 5.1 Device Symbolization and Revision Identification..............................................................................................................2 6 Advisory Descriptions............................................................................................................................................................3 7 Revision History......................................................................................................................................................................7 1 Functional Advisories Advisories that affect the device's operation, function, or parametrics. ✓ The check mark indicates that the issue is present in the specified revision. Errata Number Rev C ADC_ERR_01 ✓ ADC_ERR_02 ✓ COMP_ERR_01 ✓ GPIO_ERR_01 ✓ I2C_ERR_01 ✓ IO_ERR_01 ✓ PMCU_ERR_01 ✓ PMCU_ERR_02 ✓ PMCU_ERR_03 ✓ PWREN_ERR_01 ✓ SPI_ERR_01 ✓ SYSOSC_ERR_01 ✓ 2 Preprogrammed Software Advisories Advisories that affect factory-programmed software. ✓ The check mark indicates that the issue is present in the specified revision. 3 Debug Only Advisories Advisories that affect only debug operation. ✓ The check mark indicates that the issue is present in the specified revision. 4 Fixed by Compiler Advisories Advisories that are resolved by compiler workaround. Refer to each advisory for the IDE and compiler versions with a workaround. www.ti.com Table of Contents SLAZ741A – MARCH 2023 – REVISED APRIL 2023 Submit Document Feedback MSPM0L110x, MSPM0L13xx Microcontrollers 1 Copyright © 2023 Texas Instruments Incorporated ✓ The check mark indicates that the issue is present in the specified revision. 5 Device Nomenclature To designate the stages in the product development cycle, TI assigns prefixes to the part numbers of all MSP MCU devices. Each MSP MCU commercial family member has one of two prefixes: MSP or XMS. These prefixes represent evolutionary stages of product development from engineering prototypes (XMS) through fully qualified production devices (MSP). XMS – Experimental device that is not necessarily representative of the final device's electrical specifications MSP – Fully qualified production device Support tool naming prefixes: X: Development-support product that has not yet completed Texas Instruments internal qualification testing. null: Fully-qualified development-support product. XMS devices and X development-support tools are shipped against the following disclaimer: "Developmental product is intended for internal evaluation purposes." MSP devices have been characterized fully, and the quality and reliability of the device have been demonstrated fully. TI's standard warranty applies. Predictions show that prototype devices (XMS) have a greater failure rate than the standard production devices. TI recommends that these devices not be used in any production system because their expected end-use failure rate still is undefined. Only qualified production devices are to be used. TI device nomenclature also includes a suffix with the device family name. This suffix indicates the temperature range, package type, and distribution format. 5.1 Device Symbolization and Revision Identification