- 1
- 2
- 3
- 4
- 5
向光太阳能控制系统设计
资料介绍
本文以太阳能电池板自动跟踪系统以单片机控制为中心,由此通过连接到上单元的总线提供中央控制。使用倾斜传感器来校正误差,以确保系统的准确性和稳定性。单片机控制电机的旋转,使得太阳能电池板能够跟踪太阳光,同时还能检测电荷电路和电源电路的运行状态,从而在出现异常的情况下,适时关闭电路,软件部分使用模块设计和语言编程。最后对软件和硬件的联合测试表明,该系统能够自动和准确地跟踪太阳,满足集中控制的要求,并实现设计目标。
This paper takes the solar panel automatic tracking system as the center of the single-chip control,thus providing central control through the bus connected to the upper unit.A tilt sensor is used to correct the error to ensure system accuracy and stability.The single-chip microcomputer controls the rotation of the motor,so that the solar panel can track the sunlight,and at the same time,can detect the running state of the charge circuit and the power circuit,so that in the case of an abnormality,the circuit is closed in time,and the software part uses the module design and language programming.Finally,joint testing of software and hardware shows that the system can automatically and accurately track the sun,meet the requirements of centralized control,and achieve design goals.
部分文件列表
| 文件名 | 大小 |
| 向光太阳能控制系统设计.pdf | 1M |
全部评论(0)