- 1
- 2
- 3
- 4
- 5
基于三轴加速度传感器的抽油机冲次 冲程测量装置的设计
资料介绍
抽油机冲程、冲次是绘制抽油机示功图、计算抽油机平衡率的重要参数。通过加速度传感器测量冲程、冲次,避免了传统拉线式、角度式等方法故有的故障率高、操作繁琐、需要停井等缺点,具有自动化、不影响生产等特点。采用单轴加速度传感器测量抽油机冲程误差较大,而该项目使用三轴加速度传感器,并采用新技术、新算法,能够精确测量抽油机冲程、冲次,而且可以将数据远传至智能终端,因此该项目具有重要的研究意义和应用价值。
The pumping speed and stroke of the pumping unit are important parameters for drawing the indicator diagram of the pumping unit and calculating the balance ratio of the pumping unit.The measurement of the pumping speed and the stroke by acceleration sensor can avoid the disadvantages of the traditional wire-drawing type and the angle type,such as high failure rate,cumbersome operation,and need to stop the well,and has the characteristics of automation and no influence on production.There is a large error in the measurement of pumping speed and stroke with single-axis accelerometer.The project uses a three-axis accelerometer and adopts new technology and new algorithm to accurately measure the pump speed and stroke,and can transfer the data to the intelligent terminal,so the project has important research significance and application value.
部分文件列表
| 文件名 | 大小 |
| 基于三轴加速度传感器的抽油机冲次、冲程测量装置的设计.pdf | 1M |
相关下载
- 华为模块电源管理设计指导-(V100R001_02 Chi...
- 华为LGA模块PCB设计指导_V2.0_20150126.pdf
- HUAWEI Module USB Interface Descriptor Gui...
- HUAWEI ME909s-821 LTE LGA模块硬件指南V100R...
- HUAWEI ME909s-821 LTE LGA Module Acceptanc...
- HUAWEI 30 mm x 30 mm LGA Module Hardware M...
- HUAWEI 30 mm x 30 mm LGA Module Developmen...
- Altium_Designer_规则设置三例.pdf
- STM32F407产品技术培训-DSP库及其例程
- STM32F407产品技术培训-2.浮点单元.pdf
全部评论(1)
2024-03-17 19:22:00lgd888888
好好学习天天向上