推荐星级:
  • 1
  • 2
  • 3
  • 4
  • 5

智能路灯节能控制系统设计与实现

更新时间:2019-08-29 06:58:47 大小:956K 上传用户:杨义查看TA发布的资源 标签:智能路灯 下载积分:1分 评价赚积分 (如何评价?) 打赏 收藏 评论(0) 举报

资料介绍

文档为智能路灯节能控制系统设计与实现讲解文档,是一份不错的参考资料,感兴趣的可以下载看看,,,,,,,,,,,,,,

部分文件列表

文件名 大小
智能路灯节能控制系统设计与实现.pdf 956K

【关注B站账户领20积分】

部分页面预览

(完整内容请下载后查看)
电子技术设计与应用  
Electronics Design & Application  
10.3969/j.issn.1000-0755.2013.11.004  
智能路灯节能控制系统设计与实现  
程望斌1 陈 晋1 邹 丹1 黄奇卉1 周馨维2  
(1.湖南理工学院 信息与通信工程学院,湖南 岳阳 2.湖南理工学院 外国语言文学学院,湖南 岳阳)  
摘 要:路灯因不能按时开关造成不必要的资源浪费,为此需对路灯的开关进行智能化设计。文中设计  
了一个以AT89C51为主控芯片的智能路灯控制系统,通过液晶显示器提供人机交互界面,通过I/O口控制路  
灯的开关,从而实现路灯开关时间的智能控制。采用KEIL C51单片机编程软件编程,通过EDA软件proteus  
进行系统模拟仿真。结果表明,文中设计的系统人机交互界面简单易懂,能够达到路灯开关较高精度的时  
间控制,因此具有较好的使用价值与推广价值。  
关键词:路灯;照明控制;节能;AT89C51  
Design and Implementation of Intelligent Energy-saving Control System for Street Lamp  
Cheng Wangbin1 Chen Jin1 Zou Dan1 Huang Qihui1 Zhou Xinwei2  
(College of Information and Communication Engineering, Hunan Institute of Science and Technology, Yueyang,  
Hunan 2.School of Foreign Languages and Literature, Hunan Institute of Science and Technology, Yueyang, Hunan)  
Abstract: Because street lamp can't be switched on or off in time, the unnecessary waste of resource is caused.  
So it is necessary to conduct intellectualized design for the switches in street lamp system. An intelligent controller  
for street lamp using AT89C51 as main control chip is designed in this paper. The intelligent control of street lamp  
on/off time is realized through man-machine interface provided by LCD and the switch of street lamp is controlled  
by I/O port. The programming is accomplished by KEIL C51 SCM programming software and the system  
simulations is carried out by EDA software proteus. The result shows that the designed man-machine interface in  
this paper is easy to be understood and the controller for street lamp switching time with higher precision can be  
achieved, which has better practical and popularization value.  
Key words: street lamp; lighting control; energy-saving; AT89C51  
0 引言  
的时钟信号,然后显示到液晶显示器上,然后通过  
路灯是城市的窗口和标志,是城市最重要的基 与设定路灯的开关时间进行比对,从而控制路灯的  
础设施之一,它直接反映城市的建设水平和城市风 开关[2]。系统总体设计方案如图1所示。  
貌,体现城市建设的现代化程度。采用人工控制方  
式实现路灯开关,需要大量人力来实现和维护;整  
个夜晚将路灯开着,又会浪费大量的电力资源。欧  
美等发达国家早期采用隔盏路灯开关方法,该方法  
虽然在一定程度上减少了电能的损耗,但是造成了  
路面照明不均匀,而且路灯频繁开关会影响路灯的  
使用寿命。目前我国广泛采用的是通过光敏电阻或  
声敏电阻等传感装置感应外部环境光照强度或声音  
强弱,进而控制路灯的开与关[1]。该控制方式的缺  
点是路灯的开、关具有随意性,环境中突发强光或  
弱光、突发强音都会引起路灯的开和关。因此需要  
开发一种既稳定又节能的智能路灯控制系统。  
图1 智能路灯节能控制系统总体设计  
2 智能路灯节能控制系统软件设计  
2.1 智能路灯节能控制系统总体软件设计  
DS1302实时时钟系统可以与单片微处理器控制  
系统相互交互数据,单片机可以接收DS1302实时时  
钟系统发送过来的时间数据,也可以给DS1302实时  
1 智能路灯节能控制系统总体设计  
系统总体设计思想:由DS1302实时时钟芯片产 时钟系统发送数据。单片机接收按键输入系统的数据,  
生精确的时钟,AT89C51单片机读取DS1302芯片中 并且可以将数据转换成控制DS1302实时时钟系统的  
11  

全部评论(0)

暂无评论

上传资源 上传优质资源有赏金

  • 打赏
  • 30日榜单

推荐下载