- 1
- 2
- 3
- 4
- 5
ALTERA Serial Configuration (EPCS) Devices
资料介绍
ALTERA Serial Configuration (EPCS) Devices
EPCS devices offer the following features:
■ Supports active serial (AS) x1 configuration scheme
■ Easy-to-use four-pin interface
■ Low cost, low pin count, and non-volatile memory
■ Low current during configuration and near-zero standby mode current
■ 2.7-V to 3.6-V operation
■ EPCS1, EPCS4, and EPCS16 devices available in 8-pin small-outline integrated
circuit (SOIC) package
■ EPCS64 and EPCS128 devices available in 16-pin SOIC package
Enables the Nios processor to access unused flash memory through AS memory
interface
■ Reprogrammable memory with more than 100,000 erase or program cycles
■ Write protection support for memory sectors using status register bits
■ In-system programming (ISP) support with SRunner software driver
■ ISP support with USB-Blaster, EthernetBlaster, or ByteBlaster II download cables
■ Additional programming support with the APU and programming hardware
from BP Microsystems, System General, and other vendors
■ By default, the memory array is erased and the bits are set to 1
部分文件列表
| 文件名 | 大小 |
| EPCS_Devices_Datasheet.pdf | 936K |
全部评论(0)