- 1
- 2
- 3
- 4
- 5
阿特拉斯控制面板转MkIV Modbus地址
资料介绍
1.1 Modbus & the Network In the Elektronikon MkIV system all compressors in an installation can be connected by a data and/or control network. This is done according the Compressor Network Cabling Instruction(9820 3585 00). This instruction explains what connectors and cables should be used to interconnect the different compressors/controllers in the network. Basically this is a CAN-based local network.
In order to setup a modbus connection to one or several of the compressors in this network,a special module as to be inserted in this network.
This module will then behave as a modbus-proxy that allows access to all compressors in the network, whereby each compressor has its own modbus address(proxy concept).
部分文件列表
文件名 | 大小 |
阿特拉斯控制面板转MkIVModbus地址.pdf | 5M |
全部评论(0)