- 1
- 2
- 3
- 4
- 5
CST MICROWAVE STUDIO Tutorials
资料介绍
Geometric Construction and Solver Settings Introduction and Model Dimensions In this tutorial you will learm how to simulate rectangular waveguide devices. As a typical example for a rectangular waveguide, you will analyze a well-known and commonly used high frequency device: the Magic Tee. The acquired knowledge of how to model and analyze this device can also be applied to other devices containing rectangular waveguides.
The main idea behind the Magic Tee is to combine a TE and a TM waveguide splitter
(see the figure below for an illustration and the dimensions). Although CST MICROWAVE STUDIO can provide a wide variety of results, this tutorial concentrates solely on the S-parameters and electric fields. In this particular case, port 1 and port4
are de-coupled, so one can expect S14 and S41 to be very small.
We strongly suggest that you careftully read through the CST MICROWAVE STUDIO°
Getting Started manual before starting this tutorial.
部分文件列表
| 文件名 | 大小 |
| CST_tutorial.pdf | 6M |
全部评论(0)