AR0231AT
Advance Information
AR0231AT 1/2.7-inch 2.3 Mp
Digital Image Sensor
Description
The AR0231AT from ON Semiconductor is a 1/2.7−inch CMOS
digital image sensor with a 1928(H) × 1208 (V) active−pixel array. It
captures images in either linear, high dynamic range, or LFM modes,
with a rolling−shutter readout. The LFM mode eliminates high
frequency LED flicker in the image allowing Traffic Sign Reading
(TSR) algorithms to operate in all lighting conditions. It includes
sophisticated camera functions such as in−pixel binning, windowing
and both video and single frame modes. It is designed for both low
light and high dynamic range scene performance, with sensor fault
detection features that can enable ASIL B compliance for the camera
system. It is programmable through a simple two−wire serial interface.
The AR0231AT produces extraordinarily clear, sharp digital pictures,
and its ability to capture both continuous video and single frames
makes it the perfect choice for a wide range of applications, including
automotive ADAS, automotive scene viewing, and 1080p HDR video.
IBGA121 10x11
CASE 503BG
ORDERING INFORMATION
See detailed ordering and shipping information on page f
this data sheet.
This document contains information on a new
product. Specifications and information herein
are subject to change without notice.
Table 1. KEY PERFORMANCE PARAMETERS
This document, and the information contained herein,
is CONFIDENTIAL AND PROPRIETARY and the
property of Semiconductor Components Industries,
LLC., dba ON Semiconductor. It shall not be used,
published, disclosed or disseminated outside of the
Company, in whole or in part, without the written
permission of ON Semiconductor. Reverse
engineering of any or all of the information contained
herein is strictly prohibited.
Parameter
Optical Format
Typical Value
1/2.7−inch (6.82 mm)
Maximum Resolution
Shutter Type
1928 × 1208 (2.3 Mp)
Electronic Rolling Shutter (ERS)
3 mm
Pixel Size
Pixel Output Interfaces
Up to 4−lane HiSPi with SLVS and HiVCM MIPI
CSI−2
14−bit parallel
E 2017, SCILLC. All Rights Reserved.
Output Formats
12−bit Uncompressed Linear
20−bit Uncompressed HDR
10−bit Companded Linear
16−bit, 14−bit, or 12−bit Companded HDR
Features
• Key Technologies:
Control Interface
2−wire, Serial Control 100 kHz/1 MHz
♦ Automotive Grade Backside
Illuminated Pixel
Input Clock Range
6−50 MHz in PLL Mode
6−88 MHz Max in PLL−bypass Mode
♦ LED Flicker Mitigation Mode
♦ Sensor Fault Detection for ASIL−B
Compliance
Maximum Frame Rate
Up to 40 fps at 1928 × 1208 / 3−exposure
Up to 60 fps at 1928 × 1208 / 2−exposures
and Linear
♦ Up to 4−exposure HDR at 1928 × 1208
and 30 fps or 3−exposure HDR at
1928 × 1208 and 40 fps
Output Pixel Clock
Maximum
88 MHz
Responsivity
34 ke−/lux−sec
42.8 dB
SNR
• Latest 3.0 mm Back Side Illuminated (BSI)
Pixel with ON Semiconductor DR−Pixt
Technology
MAX
Max Dynamic Range
Operating Temp. Range
Supply Voltage
> 120 dB
–40°C to 125°C Junction
• Data Interfaces: up to 4−lane MIPI CSI−2,
Parallel, or up to 4−lane High Speed Pixel
Interface (HiSPi) Serial Interface (SLVS
and HiVCM)
I/O
Digital
1.8 V or 2.8 V
1.2 V
Analog 2.8 V
HiSPi
0.4 V or 1.8 V
Power Consumption
Packaging Options
< 350 mW Typical (1928 × 1208, 30 fps)
11 × 10 iBGA Bare Die
• Advanced HDR with Flexible Exposure
Ratio Control
© Semiconductor Components Industries, LLC, 2016
1
Publication Order Number:
September, 2017 − Rev. P6
AR0231/D
全部评论(1)
2023-08-30 16:13:28zm218wri
不错啊!